Here we mainly introduce two kinds of magnet Door Stop 304SS, namely installation floor suction and wall suction.

⒈ Install ground suction
Reason: Most of the reasons why the ground can not be absorbed is mainly because the distance between the door leaf and the ground is too high, and the general height should be controlled within 1.5 cm.

Phenomenon: When opening the door, the door cannot be fixed to the ground suction position, and the door will be pushed directly to the wall, causing the lock handle to touch the wall.

Solution: ① Put the floor suction base high or the door low, but this method has a low service life and is not beautiful. ②Change the horizontal suction to the vertical suction, which increases the height of the suction head to a certain extent and solves the problem naturally.

⒉ Install wall suction
Generally, the wall suction has no suction, most of which are asymmetrical installation and poor door suction. Here we mainly introduce the problem of asymmetric installation. As for the bad door suction, you can replace it.

Reason: The suction head of the door suction is not symmetrical with the suction cap. Simply speaking, the magnet is not aligned with the center of the iron.

Phenomenon: When the door is opened to the strong suction position, it cannot be fixed or needs to be touched lightly to have a little suction, otherwise the door will automatically pop open.

Solution 1: ① First remove the suction cap on the door leaf. ② Put the suction cap on the suction head. ③Open the door to the suction cap position, and use a pencil to draw the position of the suction cap on the fixed door leaf. ④Remove the suction cap on the suction head and fix it on the door leaf. ⑤ After the installation is completed, the suction head and suction cap installed in this way will never be dislocated, and there will be natural suction.

Solution 2: Replace the door suction with the magnetic force exposed on the suction head. This kind of door suction can suck at any angle. Compared with the suction problem, the installation is more convenient, and there is no need to position and draw a circle.

Summary: At present, no matter how cheap the door suction is on the market, there is basically no problem with the suction power, and it is not far behind; if the door suction is installed and there is no suction, 99% of it is an installation problem.